Mondema Travel 5.6 L — Black Filters — Premium pack
€294,00
Skip to product information
Mondema® Travel 5.6 L with 2 Black Filters
FOUNTAINE WATER · MONDERMA WATER FILTERS
Mondema® Travel 5.6 L with 2 Black Filters
Premium pack: stainless steel base and level tap
One 5.6 liter stainless steel fountain, two Black Filters Monderma cartridges and a stainless steel tap with level indicator to filter your tap water by gravity. Pour the water into the top tank, let it pass through the filters, then use it from the tap. The stainless steel raising base is included to facilitate the passage of a glass under the tap.
5.6 liters2 Black Filters MondermaWithout electricityStainless steel base included
Your configuration: Travel fountain + 2 Black Filters Monderma + stainless steel faucet with indicator level + stainless steel raising base.
5.6 L
capacity of the fountain
1 to 3
people, depending on use
2 filters
Black Filters Monderma included
12 month
maximum replacement mark
📐 Travel characteristics
| Features | Detail |
|---|---|
| Capacity of the fountain | 5.6 liters |
| Recommended number of people | 1 to 3 people, depending on consumption and frequency of filling |
| Operation | Filtration by gravity, without power supply or connection to plumbing |
| Tank material | AISI 304 stainless steel |
| Height in use | 46 cm, excluding base of extension |
| Advertised diameter | 19 cm |
| Height of nested tanks | Approximately 32 cm, for storage after dismantling |
| Filters supplied | 2 Monderma brand Black Filters cartridges |
| Locations in the upper tank | 2 locations for the 2 filters provided |
| Filter media | Coconut shell activated carbon block with silver, according to the composition announced by Monderma |
| Indicative flow rate with 2 filters | Up to 10 L/h announced for Travel; variable depending on the conditions of use |
| Indicative capacity of the pair | Up to 16,000 liters for the 2 filters, depending on the water and use |
| Replacement mark | 12 months maximum after commissioning of the pair or 16,000 liters, whichever comes first; earlier if necessary |
| Advertised dimensions of a cartridge | Total length of approximately 25 cm; diameter of the cap approximately 6 cm |
| Advertised weight of a cartridge | Approximately 600 g per filter |
| Tap included | AISI 304 stainless steel body with level indicator, glass tube and indicator ball |
| Raising base | Stainless steel base included in this premium pack |
| Water to use | Cold drinking water from the tap; system used without pressure |
Indicative dimensions announced for this reference, excluding base of enhancement. Allow sufficient clearance to remove the cover and fill the fountain. The weight shown in the table is for a cartridge, not the complete fountain. The total height of the fountain placed on its base is not included in the advertised height.
💧 Two Black Filters Monderma
The cartridges use a block of activated carbon from coconut shells, with silver in their composition. This range is proposed to improve the taste and odor of water, and reduce chlorine.
Black Filters is a Monderma range. It is distinct from the Black Berkey® and the Phoenix: each range has its own composition and its own replacement marks.
👀 Visible level and practical service
The faucet indicator allows you to see the water level in the tank lower without lifting the upper tank. It helps you decide when to use or refill water.
The body of the tap is made of AISI 304 stainless steel. The glass tube and its marker ball remain accessible for maintenance.
The stainless steel base completes the pack: it raises the fountain and makes it easier to fill the glasses. Allow more height on your work surface than just the dimensions of the fountain.
📦 What this configuration includes
- An upper chamber and a lower Travel chamber in AISI 304 stainless steel.
- A stainless steel cover with its button and its fixing.
- Two Black Filters Monderma cartridges, with their seal and their fixing nut.
- Un stainless steel faucet with level indicator, with the parts necessary for its assembly.
- A non-slip protective seal for the bottom of the fountain.
- A stainless steel raising base adapted to the Travel format.
🚀 Getting started in 3 steps
- Prepare the cartridges. Rinse them, then soak them in a clean container for at least 30 minutes, tilting them to expel the air. The instructions also describe a method of priming under tap.
- Assemble the fountain. Clean and rinse the tanks and the tap. Place each joint at the base of its filter, inside the upper tank, then tighten the nut by hand, without forcing. Close any unused ports.
- Rinse before drinking. Perform 2 to 3 complete filtrations and discard this preparation water, as indicated in the Black Filters instructions.
🧼 Maintenance regular
Clean the tanks and the tap regularly, after removing the filters. The system instructions recommend cleaning the lower tank every 3 to 4 days, with a soft sponge and a suitable product, then rinsing carefully.
For the cartridges, use cold water and a clean sponge suitable for their surface, without soap or detergent, and without dishwasher. Reprime them if necessary after maintenance.
Follow the faucet instructions to disassemble and clean its parts, particularly in the event of deposits or dripping.
⏱️ Understanding the flow rate
The flow rate announced for the Travel equipped with two Black Filters reaches up to 10 liters per hour. This is an indicative benchmark: priming, water height and the condition of the filters influence the flow.
The flow rate decreases when the level drops in the upper tank. Rapid flow after good priming may be normal; its speed does not allow, in itself, to conclude that there is a defect or the effectiveness of the filtration.
📅 When to replace the pair?
For this offer, the benchmark is 12 months maximum after commissioning or 16,000 liters for the pair, at the first deadline reached. Note the installation date and replace the cartridges sooner if their condition or use requires it.
The two filters work together: the number of cartridges installed does not multiply the duration of 12 months. These values are benchmarks announced by the brand, varying depending on water and use; they do not guarantee an identical reduction of each substance for the entire duration.
🔎 Dye check: check the assembly
When carried out with the dye and method suitable for Black Filters Monderma, this check is used to check for the passage of water around the joints, fixings or plugs. It helps check the tightness of the assembly.
This is not a test of filter efficiency. Discoloration does not measure the reduction of contaminants and does not provide an assessment of remaining life. Ask our team for the instructions adapted to your Black Filters before this check.
💡 The right reflex before each filling
Check the available space in the lower tank before adding water to the upper one: the fountain does not stop automatically when the reserve is full. Use cold drinking water from the tap, protect the filters from freezing and keep the fountain away from direct sunlight and heat sources.
To store the nested tanks, empty the system and dismantle the filters and the tap to protect their fixings.
Instructions, advice and documentation
- French instructions for the Monderma fountain: assembly, maintenance and guarantees
- Priming instructions for Black Filters Monderma cartridges
- Instructions for the stainless steel faucet with level indicator
- NSF supplier report J-00333345: material extraction tests
- NSF supplier directory: check references and scope relating to materials
Read the scope of NSF documents. The supplier report concerns material extraction tests; the associated NSF listing covers the material requirements for the listed part numbers. These documents do not establish filtration performance certification for the complete Monderma fountain.
For this configuration, the volume and replacement benchmarks to remember are those indicated in the table above. The Black Filters instructions describe the preparation and priming of the cartridges.
Specialists in gravity filtration for over 15 years
Coming from a pharmaceutical background, I select each system with a requirement for reliability and transparency — for pure water, without complex installation, which preserves essential mineral salts.
- Pharmaceutical expertise
- 15 years in gravity filtration
- Rigorous & transparent selection
- Ecological & sustainable solutions
Shipping
With colissimo, we will endeavor to ship your order as quickly as possible. Free delivery to a relay point from €89 in France. Prices >>
Manufacturing
Our products are manufactured by internationally renowned companies. We carefully select our manufacturing partners to ensure our products are high quality and fair value.