FOUNTAINE WATER · MONDERMA WATER FILTERS
Monderma® Travel 5.6 L with 2 Black Filters
A 5.6 liter stainless steel fountain, two Monderma Black Filters cartridges and a standard stainless steel faucet to filter your tap water by gravity. Pour the water into the top tank, let it pass through the filters, then use the tap.
Your configuration: Travel fountain + 2 Black Filters Monderma + faucet standard stainless steel.
5.6 L
fountain capacity
1 to 3
people, depending on use
2 filters
Black Filters Monderma included
12 months
maximum mark replacement
📐 The characteristics of the Travel
| Characteristic | Details |
|---|---|
| Capacity of the fountain | 5.6 liters |
| Recommended number of people | 1 to 3 people, depending on consumption and frequency of fillings |
| Operation | Gravity filtration, without power supply or connection to the mains plumbing |
| Tank material | AISI 304 stainless steel |
| Height in use | 46 cm, excluding base extension |
| Advertised diameter | 19 cm |
| Height of tanks nested | Approximately 32 cm, for storage after dismantling |
| Filters provided | 2 Monderma brand Black Filters cartridges |
| Locations in the upper tank | 2 locations for the 2 filters provided |
| Filter media | Block of activated coconut shell carbon with silver, according to the composition announced by Monderma |
| Indicative flow rate with 2 filters | Up to 10 L/h announced for Travel; variable depending on the conditions of use |
| Indicative capacity of the pair | Up to 16,000 liters for the 2 filters, depending on water and use |
| Replacement mark | 12 months maximum after commissioning of the pair or 16,000 liters, whichever comes first; earlier if necessary |
| Advertised dimensions of a cartridge | Total length of approximately 25 cm; diameter of the cap approximately 6 cm |
| Advertised weight of a cartridge | Approximately 600 g per filter |
| Tap included | Standard faucet in AISI 304 stainless steel |
| Raising base | Not included in this configuration |
| Water to use | Cold potable tap water; system used without pressure |
Indicative dimensions announced for this reference, excluding base of enhancement. Allow sufficient clearance to remove the cover and fill the fountain. The weight shown in the table is for one cartridge, not the complete fountain.
💧 Two Black Filters Monderma
The cartridges use a block of activated carbon from coconut shells, with silver in their composition. This range is proposed to improve the taste and odor of water, and reduce chlorine.
Black Filters is a Monderma range. It is distinct from the Black Berkey® and the Phoenix: each range has its own composition and its own replacement markers.
🏡 A format for your daily life
The Travel format offers a reserve of 5.6 liters and is suitable for everyday use. current for 1 to 3 people. The frequency of filling depends on your habits: drinking water, carafes at the table or in the kitchen.
The stainless steel tap allows you to serve yourself directly from the lower tank. Install the fountain on a stable surface, with enough room to fill the upper tank.
📦 What this configuration includes
- An upper chamber and a lower Travel chamber in AISI 304 stainless steel.
- A stainless steel cover with its button and its fixing.
- Two Black Filters Monderma cartridges, with their seal and their fixing nut.
- A standard stainless steel faucet, with the parts necessary for its assembly.
- A non-slip protective gasket for the bottom of the fountain.
🚀 Getting Started in 3 Steps
- Prepare the cartridges. Rinse them, then soak them in a clean container for at least 30 minutes, tilting them to expel the air. The instructions also describe a method of priming under tap.
- Assemble the fountain. Clean and rinse the tanks and the tap. Place each joint at the base of its filter, inside the upper tank, then tighten the nut by hand, without forcing. Close any unused ports.
- Rinse before drinking. Perform 2 to 3 complete filtrations and throw away this preparation water, as indicated in the Black Filters instructions.
🧼 Regular maintenance
Clean the filters regularly. tanks and the tap, after removing the filters. The system instructions recommend cleaning the lower tank every 3 to 4 days, with a soft sponge and a suitable product, then rinsing carefully.
For the cartridges, use cold water and a clean sponge suitable for their surface, without soap or detergent, and without dishwasher. Reprime them if necessary after maintenance.
Follow the faucet instructions to disassemble and clean its parts, particularly in the event of deposits or dripping.
⏱️ Understanding the flow rate
The flow rate announced for the Travel equipped with two Black Filters reaches up to 10 liters per hour. This is an indicative benchmark: priming, water height and the condition of the filters influence the flow.
The flow rate decreases when the level drops in the upper tank. Rapid flow after good priming may be normal; its speed does not allow, in itself, to conclude that there is a defect or the effectiveness of the filtration.
📅 When to replace the pair?
For this offer, the benchmark is 12 months maximum after commissioning or 16,000 liters for the pair, whichever comes first deadline reached. Note the installation date and replace the cartridges sooner if their condition or use requires it.
The two filters work together: the number of cartridges installed does not multiply the duration of 12 months. These values are benchmarks announced by the brand, varying depending on water and use; they do not guarantee an identical reduction of each substance for the entire duration.
🔎 Dye check: check the assembly
When carried out with the dye and method suitable for Black Filters Monderma, this check is used to check for the passage of water around the joints, fixings or plugs. It helps verify the tightness of the assembly.
This is not a test of filter efficiency. Discoloration does not measure the reduction of contaminants and does not assess remaining life. Ask our team for the instructions adapted to your Black Filters before this check.
💡 The right reflex before each filling
Check the available space in the lower tank before adding water to the upper one: the fountain does not stop automatically when the reserve is full. Use cold, potable tap water, protect the filters from freezing, and keep the fountain away from direct sunlight and heat sources.
To store nested tanks, empty the system and disassemble the filters and faucet to protect their mountings.
Instructions, advice and documentation
- French instructions for the Monderma fountain: assembly, maintenance and guarantees
- Instructions for priming the Black Filters Monderma cartridges
- Instructions for the standard stainless steel faucet
- NSF supplier report J-00333345: extraction tests materials
- Supplier's NSF Directory: Check material references and scoping
Read the scope of NSF documents. Supplier report concerns extraction testing of materials; the associated NSF listing covers the material requirements for the listed part numbers. These documents do not establish filtration performance certification for the complete Monderma fountain.
For this configuration, the volume and replacement benchmarks to remember are those indicated in the table above. The Black Filters instructions describe the preparation and priming of the cartridges.
Specialists in gravity filtration for over 15 years
Coming from a pharmaceutical background, I select each system with a requirement for reliability and transparency — for pure water, without complex installation, which preserves essential mineral salts.
- Pharmaceutical expertise
- 15 years in gravity filtration
- Rigorous & transparent selection
- Ecological & sustainable solutions
Shipping
With colissimo, we will endeavor to ship your order as quickly as possible. Free delivery to a relay point from €89 in France. Prices >>
Manufacturing
Our products are manufactured by internationally renowned companies. We carefully select our manufacturing partners to ensure our products are high quality and fair value.