PF-2 Berkey filter - | New without packaging | fluoride and arsenic cartridge | 6 months
Promotional price
€90,00
Regular price €112,00
Skip to product information
Berkey PF-2™
PF-2 Berkey filter - | New without packaging | fluoride and arsenic cartridge | 6 months
Promotional price
€90,00
Regular price €112,00
🛡️ Garantie 6 months — voir conditions
FOUNTAINE WATER · REPLACEMENT FILTERS
Berkey PF-2™
2 new post-filters without packaging
Complete your Berkey® filtration with a stage dedicated to reduction of fluorides and arsenic. The PF-2™ cartridges attach under your Black Berkey® or Phoenix Gravity New Millennium Edition™ main filters, inside the lower tank.
New without packagingBlack Berkey® and Phoenix compatible2 cartridges supplied
✓ Specific offer: 2 new Berkey PF-2™ post-filters, sold without their packaging original. Fountain and main filters sold separately.
2 filters
1 pair of PF-2™ cartridges
15.2 cm
Length of a cartridge
3,785 L
Replacement mark per pair*
12 months
Maximum expiry date after commissioning*
Dimensions, content and compatibility of PF-2™
| Features | Detail |
|---|---|
| Reference | Berkey PF-2™ — fluoride and arsenic post-filter |
| Quantity supplied | 2 cartridges, i.e. 1 pair |
| Condition of this offer | New, without original packaging |
| Dimensions of a cartridge | Length: approximately 15.2 cm ; diameter: approximately 6.35 cm |
| Reduction media | Activated alumina in the form of fine granules |
| Cartridge body | No. 5 polypropylene BPA-free |
| Targeted substances | Fluorides, arsenic V and pre-oxidized arsenic III |
| Compatible main filters | Black Berkey® BB9-2 and Phoenix Gravity New Millennium Edition™ |
| Location | Under the main filters, in the lower bowl of the Berkey® system |
| Number to install | 1 PF-2™ per main filter in service |
| Compatibility exception | Not compatible with the Go Berkey® |
| Replacement recommended by the manufacturer | Each pair: 1,000 US gallons, approximately 3,785 L, or 1 year — whichever comes first |
| Manufacturer's commercial warranty | 6 month limited warranty, under the terms of New Millennium Concepts, Ltd. |
* Replacement at the earliest expiry date, for each pair in service. Dimensions rounded from manufacturer's values: 6 × 2.5 inches.
A targeted supplement for your drinking water
Water first passes through the main filters in the upper tank, then through the PF-2™ cartridges suspended in the lower tank. Their media retains the targeted substances on its surface: this is the principle of adsorption.
The PF-2™ thus complements the Black Berkey® or the Phoenix for the reduction of fluorides and certain forms of arsenic. They are used with the main filters adapted to your system.
The actual capacity depends in particular on the concentrations present in the water and its pH. The manufacturer indicates optimal efficiency between pH 5 and 7. These conditions must be taken into account to assess the advertised performance.
THE CONTENT OF YOUR ORDER
Choose the right number of cartridges
This offer includes a pair of two PF-2™. It allows you to equip a system using two main filters. A four main filter configuration requires four PF-2™s.
Both cartridges are new and supplied without their original packaging.
Main filters and fountain are sold separately.
LITERAGE AND USAGE LIFE
Two markers for replacement
Note the date of commissioning and track the volume of water filtered. For each pair of PF-2™, replace the cartridges as soon as 3 approximately 785 liters or 12 months are reached.
Earlier replacement may be necessary depending on the quality of the water and its use. The 3,785 liter mark corresponds to a pair.
The 6-month manufacturer's commercial warranty concerns the conditions of support for the product. It is separate from the replacement frequency.
PRIMING AND ASSEMBLY
Installation in just a few steps
- Prime each PF-2™ with cold water, in both directions, according to the instructions, until the water runs clear.
- Screw the threaded end onto the filter stem main already installed. Do not exceed 8 turns and do not force : excessive tightening can damage the internal sieve.
- Replace the tanks, carry out a first fill and discard this first filtered water.
Consult the official instructions in French before installation
EVERYDAY
Understanding the flow rate with PF-2™
The addition of PF-2™ creates an additional filtration step. The system flow rate may therefore decrease, particularly when the water from the lower tank reaches the bottom of the cartridges.
This slowdown is part of the intended operation. Allow time for filtration and check priming if flow becomes abnormally low.
THE RIGHT THOUGHTS
Dye test: remove PF-2™ first
Always remove PF-2™ before performing a red dye test on your system.
The assembly test concerns the main filters and their mounting points. It does not measure the effectiveness of PF-2™ against fluorides or arsenic. Follow the instructions corresponding to the main filters you are using.
Origin: Berkey PF-2™ filters are manufactured and assembled in the United States.
Instructions, advice and documentation
Specialists in gravity filtration for over 15 years
Coming from a pharmaceutical background, I select each system with a requirement for reliability and transparency — for pure water, without complex installation, which preserves essential mineral salts.
- Pharmaceutical expertise
- 15 years in gravity filtration
- Rigorous & transparent selection
- Ecological & sustainable solutions
Shipping
With colissimo, we will endeavor to ship your order as quickly as possible. Free delivery to a relay point from €89 in France. Prices >>
Manufacturing
Our products are manufactured by internationally renowned companies. We carefully select our manufacturing partners to ensure our products are high quality and fair value.