monderma fountain Fontaine Big 8.5L stainless steel gravity fountain - 2 FTO+ Coldstream - Vue faucet - 6 months of filtration Monderma waterfilters

Mondema Travel 5.6 L — Coldstream FTO+ — Level tap

€290,00
Skip to product information
monderma fountain Fontaine Big 8.5L stainless steel gravity fountain - 2 FTO+ Coldstream - Vue faucet - 6 months of filtration Monderma waterfilters

Mondema Travel 5.6 L — Coldstream FTO+ — Level tap

€290,00
✓ Testé selon la norme NSFAcier Inoxydable🕐 2 filtres = 6 mois

🛡️ Garantie 2 years — voir conditions

FOUNTAINE WATER · MONDERMA WATER FILTERS

Mondema® Travel 5.6 L
2 Coldstream FTO+ filters
Level tap

Find them characteristics of this stainless steel gravity fountain, equipped with two Coldstream FTO+ ceramic and activated carbon cartridges. A reserve of filtered water to be served at the tap, without connection to the network or electricity.

Reserve 5.6 L2 FTO+ filtersLevel tapOld range

Old Coldstream FTO+ configuration. In the Monderma offer, this range of filters has been replaced by versions Imperial GF and AMB. The information below remains useful for identifying and maintaining your equipment.

5.6 L

tank capacity

1 to 2 people

indicative use

2 FTO+

filters of this configuration

5–6 months

replacement interval

📐 Dimensions and characteristics

Feature Detail
Model Monderma® Travel — Coldstream FTO+ configuration
Capacity tank 5.6 liters
Recommended fireplace 1 to 2 people, for information only depending on consumption
Filters of this configuration 2 Coldstream FTO+ cartridges — reference CF163W
Media filters External ceramic and internal activated carbon
Material of the tanks AISI 304 stainless steel
Advertised height of the fountain 46 cm
Advertised diameter of the tanks 19 cm
Height of nested tanks 32 cm, for storage and transport
Faucet in this configuration Stainless steel faucet with level indicator
Raising base Not included in this configuration
Renewal of FTO+ Every 5 to 6 months, without exceeding 6 months; earlier if necessary
Nominal capacity CF163W 1 500 liters announced for the cartridge; also respect the replacement deadline
Flow rate mark CF163W 1 L/h minimum in the manufacturer's sheet. The actual flow rate of the fountain depends on the conditions of use.
Water temperature 5 to 25 °C, according to technical sheet CF163W
Operation Gravity filtration, without electricity or pressure connection

Indicative dimensions announced for this reference, at check if the available space is constrained. Tank capacity describes storage volume, not hourly production. The nominal capacity of a cartridge does not guarantee an identical result for each substance over its entire duration of use.

📦 Configuration in detail

  • The upper and lower Monderma® tanks in AISI 304 stainless steel.
  • 2 Coldstream FTO+ filters.
  • Stainless steel faucet with level indicator.

💧 Simple everyday action

Pour the water into the upper tank: it passes through the filters and collects in the lower tank. Then serve it from the tap.

Before each filling, check the space available in the lower tank to avoid overflowing. Use cold water suitable for filtration; laboratory results do not guarantee the potability of any unknown water.

The level indicator tap allows you to visualize the water reserve in the lower tank. It provides information on the quantity available, without measuring the quality of the water.

⏳ Understanding the flow

Ceramic allows water to pass through gradually. The water level in the upper tank, the commissioning and the surface condition of the cartridges influence the filtration speed.

A slowdown when the level drops is normal. The manufacturer's benchmark of 1 L/h concerns the CF163W; it does not constitute a promise of constant flow for the complete Monderma fountain.

🗓️ Plan for replacement

The Coldstream instructions recommend renewal every 5 to 6 months. The nominal capacity does not exempt you from respecting this schedule.

Cleaning the ceramic surface can improve the flow, but it does not regenerate the activated carbon or reset the useful life to zero.

🛠️ Commission and maintain the FTO+

  • Mount cleanly. Wash your hands, position the seal and tighten the wing nut by hand, without forcing.
  • Rinse the new filters. The Coldstream instructions ask to let it filter then throw away the first 10 liters. It may take up to 45 minutes to impregnate the filters.
  • Clean the ceramic if the flow rate decreases. Lightly scrub the surface with a suitable pad under cold water, preventing cleaning water from entering the filter outlet.
  • After at least 5 days without use, fill the upper tank and discard the filtered water of this rinsing, in accordance with the instructions.
  • Follow the FTO+ protocol. Do not apply the dye test provided for other families of filters to ceramic cartridges. Checking an assembly does not replace a laboratory efficiency test.

🔄 Switch to the Imperial range

Do you already have Monderma tanks? Consult the Imperial GF and Imperial refills AMB and check their installation in your system. Then adopt the instructions for the new cartridge: its preparation, flow rate and maintenance schedule differ from those of the FTO+.

To choose a complete fountain in the same format: Monderma Travel 5.6 L with 2 Imperial GF or Monderma Travel 5.6 L with 2 Imperial AMB.

🔬 Understanding Coldstream testing

The manufacturer publishes results for the Coldstream FTO+ CF163W tested in a Coldstreamsystem, on identified substances: notably chlorine, lead and certain organic compounds. Results vary depending on the substance and the volume already filtered.

These tests do not demonstrate total elimination of all contaminants. Reference to NSF/ANSI protocols 42, 53 or P231 describes the framework of the tests; it is not worth, in itself, NSF certification of this Monderma fountain.

Filter manufacturing: Coldstream FTO+ cartridges are manufactured in the United Kingdom. The tanks and the tap of this configuration are made of AISI 304 stainless steel.

Instructions, advice and documentation
Specialists in gravity filtration for over 15 years

Coming from a pharmaceutical background, I select each system with a requirement for reliability and transparency — for pure water, without complex installation, which preserves essential mineral salts.

  • Pharmaceutical expertise
  • 15 years in gravity filtration
  • Rigorous & transparent selection
  • Ecological & sustainable solutions
Shipping

With colissimo, we will endeavor to ship your order as quickly as possible. Free delivery to a relay point from €89 in France. Prices >>

Manufacturing

Our products are manufactured by internationally renowned companies. We carefully select our manufacturing partners to ensure our products are high quality and fair value.

You might also like!

  • 5 stars: 3 (75%)
  • 4 stars: 1 (25%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
C
Claude RAYNAL
Petit problème concernant l'étanchéité du robinet

Je suis très satisfaite par la qualité de la fontaine et celle de l'eau qui en découle. Cependant, je n'arrive pas à trouver comment fermer le robinet, qui goutte à l'arrêt. Il tombe une goutte environ toutes les 15 secondes, par le robinet. Je précise qu'il n'y a pas de fuite au niveau du raccord entre celui-ci et la fontaine, mais que les gouttes sortent par l'extrémité où coule l'eau lorsqu"on la tire. Ce n'est pas grave, mais gênant car je dois mettre un récipient en-dessous pour récupérer cette petite fuite.

Bonjour,
Nous vous remercions pour votre retour positif concernant la qualité de notre fontaine et de l’eau filtrée.
Concernant le léger goutte-à-goutte que vous constatez, sachez que le robinet est entièrement démontable afin de faciliter son entretien.
Dans votre cas, il est possible que ce problème soit simplement lié à un léger desserrage de la tête du robinet.
Nous vous invitons donc à resserrer délicatement à la main la tête du robinet, sans utiliser d’outil, puis à vérifier si le goutte-à-goutte persiste.
Si le problème n’est pas résolu après cette manipulation, n’hésitez pas à revenir vers nous afin que nous puissions vous apporter une solution.
Bien cordialement,
Le service client

a
armand lopez
Fontaine Monderma 5,6, filtres cold stream

Bonne communication service réactif, envoi rapide.
Très satisfait du produit.
Le contenu des cuves 5,6 permet une manipulation des cuves plus aisée pour le nettoyage et un renouvellement de l’eau dans les cuves plus fréquent et évite que les filtres restent trop longtemps hors d’eau.

Bonjour Armand, merci beaucoup pour votre gentil commentaire ! Nous sommes ravis que le produit vous satisfasse et que notre service ait été à la hauteur. N'hésitez pas à revenir vers nous pour toute question ou besoin futur. Belle journée !
Ps: merci pour la photo

D
Damien Snocq
Très satisfait ! Après deux semaines d'utilisation — et comme conseillé

Très satisfait ! Après deux semaines d'utilisation — et comme conseillé, deux cycles de rinçage au départ —, l'eau a un goût parfaitement neutre et agréable. Le robinet à vue est hyper pratique pour savoir quand remplir la cuve inox. Produit robuste et très efficace, je recommande !

D
DECONFIN Jean-Louis
Excellent matériel!

J’utilise la fontaine depuis 8 jours et je suis pour l’instant totalement satisfait. Le montage et l’utilisation sont simples et enfin je peux boire l’eau du robinet. L’eau filtrée est douce et agréable.
Je suis seul et la fontaine 5,6l est parfaite en quantité .
J’ai déjà recommandé à trois de mes amis!