Mondema Travel 5.6 L — Imperial GF — Premium pack
€309,00
Skip to product information
Monderma® Travel 5.6 L with 2 Imperial GF filters
FOUNTAINE WATER · MONDERMA WATER FILTERS
Monderma® Travel 5.6 L with 2 Imperial GF filters
Premium pack: level tap and stainless steel base
Prepare your drinking water at the house with a stainless steel fountain of 5.6 L, operating by gravity. The two Impérial GF filters combine a ceramic envelope with an internal media: granular activated carbon and zeolite. Pour cold drinking water into the upper tank and find the filtered water in the lower reserve, ready to be served from the tap.
AISI 304 stainless steelWithout electricityCleanable ceramicPremium pack: level tap and stainless steel base
Your configuration : Monderma Travel fountain 5.6 L, 2 Imperial GF filters and stainless steel faucet with level indicator with stainless steel base included.
5.6 L
capacity of the fountain
2 filters
Imperial GF included
7,000 L
indicative capacity for the pair
12 months
maximum replacement mark
📏 All the characteristics of your Travel
| Features | Detail |
|---|---|
| Model | Mondema Travel |
| Capacity of the fountain | 5.6 L |
| Use reference | 1 to 3 people, depending on consumption and filling frequency. |
| Indicative height | Approximately 46 cm — excluding base of extension. |
| Indicative diameter of the tank | Approximately 19 cm |
| Material of the tanks | AISI 304 stainless steel |
| Tap supplied | Stainless steel faucet with level indicator |
| Raising base | Included — in AISI 304 stainless steel. |
| Filter elements supplied | 2 Imperial GF filters, with seals and nuts fixing. |
| Composition of filters | Microporous ceramic impregnated with silver; internal media: granular activated carbon and zeolite. |
| Format of a filter | Approximately 17.8 cm in height × 7 cm in diameter (7 × 2.75 inches). |
| Indicative filtration capacity | 7,000 L for the 2 filters, variable depending on water and use. |
| Replacement of filters | 12 months maximum after commissioning of the pair, or earlier depending on the use and condition of the elements. |
| Filtration rate | Approximately 3 L/h for the pair, as an indication; variable flow rate during filling. |
| Water to use | Cold drinking water from the network ; use by gravity, without pressure. |
| Installation | To place on a flat and stable surface; without electricity or connection to plumbing. |
| Filter maintenance | Exterior ceramic cleanable in cold water, according to the instructions. |
Indicative overall dimensions. Also provide the necessary space to access the lid and serve the water. The filtration capacity and the durations announced vary depending on the water and the conditions of use.
🌿 Impérial GF: ceramic and granular activated carbon
The water first passes through a microporous ceramic envelope, then meets the granulated activated carbon and the zeolite placed inside. The ceramic surface remains accessible to remove deposits during maintenance.
The guideline for choosing: GF designates the granular carbon version of the Imperial range. The AMB version uses a compressed coal block; their flow and capacity marks are different.
✨ The comfort of the premium pack
The stainless steel faucet with level indicator allows you to see the quantity of water available in the reserve. The stainless steel raising base raises the fountain to make it easier to pass a glass under the tap.
Provide a stable and fairly clear location above the lid to fill the tank. The dimensions of the fountain indicated in the table are excluding base of extension.
💧 GF: the flow rate marks
Approximately 3 liters per hour with the two GF filters: this mark is indicative. The water level in the upper tank, the preparation and the condition of the filters influence the actual flow rate.
The first filtration may be slow, while the ceramic soaks. The flow rate also changes during filling: as the level drops, the thrust of the water decreases.
To maintain comfortable use: prepare the water in advance and gently clean the ceramic when the flow slows down. A persistent slowdown after cleaning may indicate that it is time to replace the elements.
🛠️ First use: four steps
- 1. Prepare the parts. Wash your hands, clean and rinse the tanks and faucet. Check that the ceramic of both filters is intact.
- 2. Install the filters. Place the flat gasket against the base of each element, inside the upper tank. Pass the rod through the hole and screw the nut underneath by hand, without forcing. Close any unused openings with the appropriate caps.
- 3. Prepare the ceramic by gravity. Filter a first filling and throw away all the water collected. Leave the filters in place overnight without using the fountain. The next day, make a second fill and also discard the filtered water.
- 4. Start your use. The water from the next filling can be consumed. Before filling the top tank, make sure that the bottom reserve can accommodate the added volume.
Preparation without pressure: do not let water enter through the threaded rod of the filter. Ceramic elements are prepared according to their own instructions.
🧽 Maintenance and replacement of filters
Clean the surface when the flow slows or deposits accumulate on the surface. Remove the filters carefully and use a clean soft brush under cold water, without soap or detergent. Rinse, then reassemble the joints and nuts by hand.
After this surface cleaning, the instructions do not require redoing the two preparation fillings. Cleaning does not reset the usage time.
The capacity of 7,000 liters refers to the pair and varies depending on water and usage. Note the commissioning date: Monderma plans a replacement within 12 months maximum, sooner if an element is damaged or if the flow rate remains insufficient after cleaning.
☀️ Good daily actions
- Keep the reserve clean. The system instructions provide for cleaning the lower tank every 3 to 4 days. Remove the filters before cleaning the tanks with mild dishwashing liquid, then rinse thoroughly.
- Adjust each filling. A reserve that is already partially full must be able to accommodate all the water you add to the upper tank.
- Protect the elements. Use cold drinking water, avoid heat and protect the filters from freezing and temperatures below 4.5°C.
- After a prolonged absence, throw away the first filtered filling and follow the instructions in the instructions.
📦 The contents of your set
- 1 complete Monderma Travel 5.6 L stainless steel fountain, with upper and lower tanks and cover.
- 2 Imperial GF filters with their seals and fixing nuts.
- 1 stainless steel tap with indicator level.
- 1 stainless steel raising base.
- 1 installation and maintenance guide.
- 1 black protective bag.
💡 And the minerals?
This filtration does not demineralize the water. A TDS tester measures dissolved substances; it does not allow the effectiveness of the filters to be evaluated. Its value may increase at start-up due to the mineral materials of the ceramic.
Origin of the filter elements: Impérial GF filters are manufactured in the United States.
Instructions, advice and documentation
- Impérial GF instructions in French: preparation, maintenance and filtration benchmarks
- Complete instructions Monderma fountains: assembly, maintenance and warranty conditions
- Understanding the difference between Imperial GF and AMB filters
- Envirotek manufacturer's report no. 16-112 (2016) — testing document
- Tests and certificates published by Monderma: dates, references and scope of the documents
How to read the documents: the report Envirotek cites NSF standards 42 and 53 and describes results for the sample tested. It does not present two series of results separately identified for GF and AMB. The manufacturer's NSF/ANSI 42 document, dated 2020, is also not sufficient to establish certification for each Monderma fountain thus equipped. Check the exact scope of parts before assigning a particular discount to a model.
Specialists in gravity filtration for over 15 years
Coming from a pharmaceutical background, I select each system with a requirement for reliability and transparency — for pure water, without complex installation, which preserves essential mineral salts.
- Pharmaceutical expertise
- 15 years in gravity filtration
- Rigorous & transparent selection
- Ecological & sustainable solutions
Shipping
With colissimo, we will endeavor to ship your order as quickly as possible. Free delivery to a relay point from €89 in France. Prices >>
Manufacturing
Our products are manufactured by internationally renowned companies. We carefully select our manufacturing partners to ensure our products are high quality and fair value.